2018 Report – The High Costs of Congestion, Plus Possible Solutions

Heavy interstate traffic.
Facebook
Twitter
LinkedIn
Print
Email

The American Transportation Research Institute (ATRI) has released its 2018 report on the Cost of Congestion to the Trucking Industry, which showed that congestion caused nearly 1.2 billion hours of delay (the equivalent of 425,533 commercial truck drivers sitting idle for an entire working year) and cost the industry more than $74.5 billion in additional operational costs during 2016 alone. When you distribute that figure across the 11.5 million registered large trucks in the U.S., you get an average cost of $6,478 per truck – all as a result of congestion.

According to the report, and as many in the trucking industry know, “traffic congestion results in wasted fuel, increased labor costs, safety costs, and vehicle wear and tear. Secondary impacts of congestion on trucking include inefficiencies in the nation’s supply chain as pick-up and delivery schedules are impacted by traffic delays.”

Majority of Congestion Concentrated in Urban Areas and Most Populous States

Additionally, the report found that 91% of the total national congestion costs could be attributed to metropolitan areas, with New York, Chicago, Miami, Philadelphia, Los Angeles, Washington D.C., Dallas, Houston, Atlanta, and Nashville rounding out the top 10 in terms of cost.

Not surprisingly, the three most populous states – California, Texas, and Florida – were also the three most congested, accounting for 23% of the total congestion costs nationally.

Trucking Not the Only Industry to Feel the Effects

The trucking industry isn’t isolated in feeling the effects congestion. Shippers and consumers also experience added costs. The spoilage of perishable goods, the need to remain open for longer hours to process late deliveries, the loss of revenue or incurrence of penalties due to late deliveries, and the payment of higher shipping rates (as carriers are forced to offset some of their congestion-related expenses) can all be chalked up to congestion, in part.

Improved Infrastructure and Planning as Possible Solutions

Unfortunately, congestion is expected to get worse on America’s roadways as metropolitan areas become more crowded and ecommerce continues to drive delivery demand. Continued economic growth, rising numbers of traffic accidents, and expectations of increasingly severe weather will also contribute to greater congestion. Additionally, according to data from the U.S. Department of Transportation’s Federal Highway Administration (FHWA), “Increased congestion is outpacing system improvements gained from investments in congestion reduction strategies, such as road widening, better intermodal connections, and traffic and demand management technologies.”

Fortunately, there are additional solutions to our traffic woes currently being thought up and deployed. Some of the most commonly touted solutions include:

Investment in and improvement of public transportation – as public transportation improves in metropolitan areas, we will see fewer cars on the road, which will help alleviate congestion.

Introduction of adaptive traffic signals – collecting more data on traffic flow and patterns can help us identify choke points and areas where idle times are unnecessarily high. This information can then be used to implement smart traffic signals, which can reduce the impacts of congestion in real time.

Metered merging – increased use of metered merging promotes a smoother merging process onto highways and interstates, resulting in fewer accidents and less bottlenecking at merge points.

Traffic condition and diversion updates – investing in infrastructure and signage that provides drivers with updated traffic, congestion, and diversion information allows drivers to find alternate routes before getting stuck in jams.

Implement traffic bearing shoulders – during peak hours, shoulders can be opened on certain stretches of highway to lessen congestion.

Autonomous vehicles – as autonomous vehicle technology improves, we will see increased use of autonomous commercial and consumer vehicles on the roads. While this won’t necessarily reduce the number of vehicles on the roads, it will help to create smoother driving patterns and reduce accident frequency. It may also help eliminate issues like phantom traffic, which is caused by drivers breaking in the middle of otherwise smooth flowing highways, creating a ripple effect that can slow traffic down for miles.

 

For more articles like this, subscribe to our newsletter!

Was this article helpful?

Subscribe to our Blog

Stay up to date with our latest news, receive exclusive deals, and more.

2023 Newsletter Subscription Contact Form

Subscribe to Our Blog

Stay up to date with our latest news, receive exclusive deals, and more.

Inaccurate measurements and transposition errors are common pitfalls when trying to measure incoming and outgoing freight by hand. And both open your Transportation Management Systems (TMS) and Warehouse Management Systems (WMS) up to bad data, which can limit their effectiveness and compromise the efficiency of your warehouse or distribution center....

The holiday shopping (and shipping) season has officially started. In fact, nearly half of holiday shoppers have already begun purchasing presents for family, friends, and let’s be honest, themselves. Not only that, but shoppers are expected to spend about 1.1 trillion this holiday season, which would be about 5% more...

If you’re here, you’ve likely received an accessorial fee, also known as an accessorial charge, that resulted in a higher than anticipated bill from your carrier – and it probably wasn’t “received” too well. After all, nobody likes to spend more for a service than they were quoted. That said,...

Ever since volumetric freight dimensioning became the standard form of measurement for the transportation and shipping industries, companies have been working to streamline the process and take advantage of its benefits. But, like any new process, the transition to dimensional weight measurement has caused a few headaches for companies making...

Challenges in Modern Shipping Shippers today are faced with all sorts of logistics challenges. Lost shipments, damaged freight, reweigh charges and size reclassifications to name a few. “Most of our Shipper customers have experienced all sorts of issues, which is why we decided to craft a great documentation solution to...

Air Distribution, a subsidiary company of Johnson Controls, Inc. was incurring freight reclassifications due to density challenges as well as a much higher rate of lost and damaged freight. The decision was made corporately to run a Pilot program with FreightSnap to better document their freight as it is tendered...

In the rapid world of logistics and freight management, identifying leaders in innovation is crucial. Enter FreightSnap, your solution to warehouse automation and optimization. The FreightSnap Image Station, a groundbreaking development in automated freight documentation, is redefining the game for shippers and carriers. Join us on an exciting journey as...

Subscribe to our Blog

Stay up to date with our latest news, receive exclusive deals, and more.

Measuring, weighing and photographing palletized freight by hand can be a time-consuming process that leaves room for measurement and transposition errors. The current generation of static pallet dimensioners have automated this process, allowing companies to capture this information and share it with their resource management systems in a fraction of...

With the ever-increasing speed of technology and the ever-decreasing patience of customers, having accurate freight documentation is a necessity for having a smooth and effective shipping process. However, it can be a slow process and if done incorrectly can cost you time and money. Fortunately, the FS Image Station makes...

Challenges in Modern Shipping Shippers today are faced with all sorts of logistics challenges. Lost shipments, damaged freight, reweigh charges and size reclassifications to name a few. “Most of our Shipper customers have experienced all sorts of issues, which is why we decided to craft a great documentation solution to...

How you implement a dimensioning program can determine the level of efficiency your program ultimately achieves. Over the years, we’ve seen dozens of companies invest in dimensioning technologies, and truth be told, some have been more successful than others. Why? Most of it can be boiled down to three simple,...

Challenges in Modern Shipping Shippers today are faced with all sorts of logistics challenges. Lost shipments, damaged freight, reweigh charges and size reclassifications to name a few. “Most of our Shipper customers have experienced all sorts of issues, which is why we decided to craft a great documentation solution to...

Air Distribution, a subsidiary company of Johnson Controls, Inc. was incurring freight reclassifications due to density challenges as well as a much higher rate of lost and damaged freight. The decision was made corporately to run a Pilot program with FreightSnap to better document their freight as it is tendered...

In the rapid world of logistics and freight management, identifying leaders in innovation is crucial. Enter FreightSnap, your solution to warehouse automation and optimization. The FreightSnap Image Station, a groundbreaking development in automated freight documentation, is redefining the game for shippers and carriers. Join us on an exciting journey as...

Product Sheet - FS Parcel Dimensioner

2023 DimReimag LP - FSParcel PS Dwnld

Product Sheet - FS 5000 Dimensioner

2023 DimReimag LP - FS500 PS Dwnld

Request a Quote!

2023 DimReimag LP Pricing Request Form